Miller XR Python El manual del propietario descargar pdf (Pagina 13)

XR™ Python

Owner's Manual - Page 1

Section 3 Installation

Technical Specications

Wire Capacity

Aluminum and Cored Wire ........................... .030" - 1/16" (0.8 mm - 1.6 mm)

Solid and Hard Wire ..................................... .030" - .045" (0.6 mm - 1.2 mm)

Wire Speed (At rated feeder input voltage) .............70 - 875 ipm (22.2 mpm)

Duty Cycle - 100% (All ratings are using Argon gas) ............ 200 Amps Peak

Shipping Weight (approximate) ...................................... 19.29 lbs. (8.29 Kg)

Gun weight (less leads)....................................................... 2.5 lbs. (1.13 Kg)

Support Equipment Required

• C.V. or C.C. power source of sufcient capacity for your needs.

• Regulated gas supply and hoses.

• Properly sized power leads from power source to wire feeder and ground.

Gun Lead Connections

Power Cable

A #2 AWG power cable is used on the XR™ Python

. The gun end of

the cable has a tting crimped to the copper cable strands. This tting is

then threaded into the gun body. The cabinet end of the power cable is

incorporated into the Power Pin connector.

Conduit

The XR™ Python

comes standard with a poly-lined conduit, for feeding

aluminum wire. The longer tting with a shallow groove is used on the gun

end. A set screw located on top of the gun handle secures the conduit in

place. The cabinet end of the conduit is incorporated into the Power Pin

connector.

Gas Hose

The gas hose is pushed over a barbed tting on the gun body and secured

with a plastic tie wrap. The cabinet end of the gas hose is incorporated into

the Power Pin connector.

Electric Cable

A multi-conductor control cable is used on the XR™ Python

. The gun end

of the cable is secured with a cable clamp and the wires are connected to the

potentiometer, the micro switch, the motor and the gun body mechanically.

Slack is left in the electric cable as it exits the back of the gun to prevent

cable and/or wire breakage. The cabinet end of the control cable uses a 10-

Pin, "X" clocked Amphenol connector.

Section 4 Operation

General

The Python

maintains a constant, steady, uniform wire feed speed,

regardless of curved or looped wire conduit. The constant push exerted

by the slave motor in the cabinet, combined with the pull of the gun motor,

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Comentarios a estos manuales

Sin comentarios

Miller XR Python El manual del propietario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Sistema De Soldadura Miller XR Python